Products

1 Core Specifications: Diameter 16-30mm; Length 30-60mm 2 Plugging Speed: Approximately 1000 pieces/hour 3 Adhesion Strength: No peeling before gold spraying, no shrinkage after gold spraying 4 Operating Mode: Automatic loading, automatic plugging of both ends at once 5 Control Mode: PLC + Stepper Motor 6 Consumables: High-temperature tape 0.1×14" (available in rolls, cost ≤ 0.2 yuan/100 pieces) 7 Power Supply: 220V / Air Pressure 0.5-0.7MPa

(1) The cabinet is welded with square tubes and cold-rolled plates, and the surface is thermally sprayed after rust removal. The cabinet has good sealing and uses three layers of imported sound insulation materials for noise reduction. (2) From left to right, there are two spray chambers, namely: A spray chamber with guns 1-2 on the front and B spray chamber with guns 3-4 on the back, forming a 2+2 spray mode. The spray gun scanning adopts a servo system, and the gun distance of each spray gun can be adjusted independently.

2.1 The equipment cabinet is welded from square tubes and cold-rolled steel, derusted and painted before being surface-sprayed. The cabinet is well-sealed, uses three layers of imported soundproofing material for soundproofing, and is equipped with a hollow tempered glass observation window. 2.2 The equipment has two spray chambers, one on the left and one on the right, equipped with two independently developed spray guns: the first in the left spray chamber and the second in the right, creating a 1+1 spray pattern.

(1) The equipment has good stability and is easy to operate; (2) The spray gun uses dynamic power supply, which does not block or explode the wire; (3) The equipment has good sealing performance; (4) It uses a unique design of upper exhaust to remove dust; (5) The equipment is equipped with temperature and humidity detection functions. (6) It is equipped with Jisheng's unique dust removal system, which makes the use effect more significant.

This product is suitable for spraying metal on flat or round metallized capacitor cores. It utilizes a 6-gun, 4-rotary-disc design, employing three double-headed spray guns, one in each of three spray chambers. The guns are isolated by bell jars to minimize ozone and dust contamination. It features intelligent operation, high spray efficiency, high material utilization, low energy consumption, and low noise.

2.1.1 The frame is reliable, and the chassis and frame are considered to be rectangular or square tubes with moderate thickness, which are fully welded and have no deformation phenomenon during handling and use; 2.1.2 There are four workstations in total, three metal spraying workstations with three dust-proof bell covers, forming three independent metal spraying rooms and three independent air ducts, and another workstation is the flip side work station.